Advances in Materials and Processing Technologies

ISSN 2374-068x · Taylor & Francis · United Kingdom · active 2004–2026

Metrics

Best Scimago quartile (2025)
Q2
Cites per paper (2y)
2.3
SJR
0.43
h-index
38

“Cites per paper” is a two-year cited-by rate computed from OpenAlex. It is not a Clarivate Journal Impact Factor — we neither compute nor license that metric (how the two differ). Citation rates differ enormously between fields, so compare within a discipline. What the other figures mean: journal quartile, SJR, h-index and article processing charge.

Data as of 1 November 2026 (venue index build).

Scimago Journal Rank 2025

In the Scimago Journal Rank 2025 edition, Advances in Materials and Processing Technologies is Q2 in 2 of its 3 subject categories and Q3 in the other 1. Its best category quartile is Q2.

Scimago 2025 quartile and rank of Advances in Materials and Processing Technologies in each subject category
Subject categoryQuartileRank in category
Industrial and Manufacturing EngineeringQ2#167 of 398
Mechanics of MaterialsQ2#196 of 412
Materials Science (miscellaneous)Q3#366 of 700
Cites per document (2 years, Scopus)
2.98
Documents indexed in 2025 (Scopus)
208

The quartile is the one Scimago prints for each category. Rank is the journal's position by SJR among the journals Scimago lists in that category (#1 is the highest); “—” means we hold no rank consistent with that quartile. The document count is what Scopus indexed that year, which can be lower than a journal's full output. Source: SCImago Journal Rank 2025 edition, from Scopus data (scimagojr.com, CC BY-NC).

Advances in Materials and Processing Technologies is Q2 in 2 of its 3 Scimago subject categories (2025 edition; best category Industrial and Manufacturing Engineering: Q2, #167 of 398), with SJR 0.43 (Scimago) and an h-index of 38 (OpenAlex). Listed in Scopus, Web of Science.

Is this the right journal for your paper?

The AI Journal Finder ranks the best-matched journals for your paper’s topic — with tier, open access, citation rate and predatory flags. Free to start.

Try the Journal Finder →

Indexing & access

Indexed in
ScopusWeb of Science
Access status:
subscription. Where this comes from publisher-level signals rather than works-level data it is a heuristic — confirm on the journal’s own site, especially regarding any article processing charge.

Official journal site →

Scope

aluminumalloyscompositespropertiesmechanicalengineeringadvancedmachiningoptimizationtechniqueselectricalelectronic

Frequently asked

Is Advances in Materials and Processing Technologies a predatory journal?

Our screening does not flag Advances in Materials and Processing Technologies. That is not a guarantee of quality — it means the venue is not on Beall's archive (frozen since 2017) and does not match our name-pattern heuristic. It is listed in Scopus, Web of Science, which is a positive signal.

Is Advances in Materials and Processing Technologies indexed in Scopus or Web of Science?

Per our venue index, Advances in Materials and Processing Technologies appears in: Scopus, Web of Science. Index membership changes over time — confirm on the index's own site before relying on it.

What is the impact factor of Advances in Materials and Processing Technologies?

Papers in Advances in Materials and Processing Technologies are cited about 2.3 times each within two years of publication, and Scimago places it in Q2, with an h-index of 38. Those are the open equivalents: the Clarivate Journal Impact Factor is a proprietary metric we neither compute nor license, so we show the two-year citation rate and Scimago quartile instead — they answer the same question of how heavily the journal is cited. A citation rate is a property of a field as much as of a journal.

What Scimago quartile is Advances in Materials and Processing Technologies (Q1, Q2, Q3, or Q4)?

In the Scimago Journal Rank 2025 edition, Advances in Materials and Processing Technologies is Q2 in 2 of its 3 subject categories and Q3 in the other 1. By category: Industrial and Manufacturing Engineering: Q2, #167 of 398; Mechanics of Materials: Q2, #196 of 412; Materials Science (miscellaneous): Q3, #366 of 700. Its best category quartile is Q2. Quartiles split the journals in a subject category into four equal groups by SJR, so Q1 is the most-cited quarter and Q4 the least; Advances in Materials and Processing Technologies is cited about 2.3 times per paper over two years, with an h-index of 38.

What is the Web of Science (JCR) quartile of Advances in Materials and Processing Technologies?

The Web of Science quartile comes from Clarivate's Journal Citation Reports (JCR), a proprietary product we neither license nor compute — so we cannot state a JCR quartile for Advances in Materials and Processing Technologies. The open equivalent is its best Scimago quartile, Q2 in Industrial and Manufacturing Engineering and 1 other category, derived from Scopus citation data. Because JCR ranks against Web of Science and Scimago against Scopus, the two can differ, so check Clarivate's site directly if you need the JCR quartile specifically.

Is Advances in Materials and Processing Technologies open access?

Our index records its access status as "subscription". Where this is derived from publisher-level signals rather than works-level data it is a heuristic, so confirm on the journal's own site — particularly if an article processing charge matters to you.

Ready to submit? Tools for your next paper

How Pre-Check worksHow AI Review works

Compare the category — Honest roundups of the AI research tools, ours listed alongside the alternatives.

Similar venues

Compare it with its peers: Ranked Mechanical Engineering journals — ranked by Scimago quartile and cites per paper, predatory venues excluded.

Command palette

Jump anywhere, run any action.